NewStats: 3,261,660 , 8,174,671 topics. Date: Friday, 30 May 2025 at 12:30 AM 6157d

6z3e3g

Solar Energy, A Complement To FTA - Satellite TV Technology (1898) - Nairaland 4f4l6

Solar Energy, A Complement To FTA (2756399 Views)

Dam5reey1(m): 8:14pm On Jan 25

Na so..

DIY all the way!

Growatts 6kw
jinko 8* 550
Deriy 30kwh..

Inverter and BMS configured to my settings... Balancing set....
Battery parallel communication set...
BMS and inverter communication set...

3 Likes

Ferdiwar: 8:32pm On Jan 25

There's an almost 200mv deviation from the highest and lowest cells which is not really good. Try to limit the LCD to 3v/cell and monitor the performance at a higher charge of say 3.3v to 3.45v and see how it goes.

But try and return it for them to check and fix it.

Haykay2001:

Not just those 2 model at all.. Will advice ppl to stay away from sako for now.. I have been having issues with their inverter and battery.. . One of the cell in their battery is very low.. Been asking for solution how to balance it but nothing is forth coming.. The inverter itself have been giving issues since the day of Instllation.. That was early Nov 2024 less than 3 mths ago.. Now battery is no longer balance. I was told i need a load to lower the high voltage, which i know nothing abt.. I dont build battery. For the last 3days now they stopped responding to messages.
I asked for their service center in Lagos so that i can send it for repair still no reply at all.. Items of less than 3mths and the customer is messaging me every single day.. Always on my neck.. 6.2kva paired with 10kwh battery.
Anyone with solution should kindly help me out abeg.. 🙏 🙏 🙏

toscotech(m): 8:53pm On Jan 25

Please have used powmr inverter hope is good buy

Valto(m): 5:23am On Jan 26

Valto:

24v 7.5kwh lifepo4 lithium battery + 24v 3kw hybrid inverter =1.580m
4.2kw hybrid inverter with 120A Mppt +24v 7.5kwh lifepo4 lithium battery =1.650m!
48v 6.2kw hybrid inverter with 120A Mppt + 48v 14.3kwh lifepo4 lithium battery (actual capacity 15kwh) =2.750m
48v 6.2kw hybrid inverter with 120A Mppt + 48v 16kwh lifepo4 lithium battery (actual capacity 17kwh) =3.150m
24v 7.1kwh, 24v 8kwh, 48v 14.3kwh, 48v 17kwh lifepo4 lithium battery available at heavily discounted prices
SVOLT 50AH, CATL 23AH,EVE 20AH lifepo4 lithium battery cells available at discounted prices.
>>>>>>>>>> incoming and available soon.
12v 1.75kwh lifepo4 lithium battery
12v 3.5kwh lifepo4 lithium battery
24v 3.5kwh lifepo4 lithium battery
48v 7kwh lifepo4 lithium battery
we can waybill easily to any location in Nigeria!
our office Address is at NO:29 ibusa road Asaba delta state
whatsapp 08020574628 or telegram@ValtechEnergy

Valto(m): 5:37am On Jan 26

12v /24v 1600w pure sine wave sachet inverter @68k

12v/24v 2000w pure sine wave sachet inverter @95k

12v/24v 3000w pure sine wave sachet inverter @105k.

pls note, the continuous power is half of the rated capacity!
12v 20A (14v) dedicated lifepo4 lithium battery charger available @47k

24v 20A (27.8v) dedicated lifepo4 lithium battery charger @55k

we are the official distributor of JK Jikong and JBD Jiabaida BMS in Nigeria. get your various smart and hardware BMS, NEEY 5A active balancer, voltmeters, displays and accessories for lithuim battery at very affordable prices.
we are also a major distributor of WELION inverters.
office address is at NO:29 ibusa road Asaba delta state. we waybill to all location ls in Nigeria. us on WhatsApp 08020574628 or telegram@ValtechEnergy

1 Like

ask4bk(m): 5:48am On Jan 26

brightk:
u de fear 2 call names young man

Dam5reey1 no fit call Mr. Valtz name though I know na him him wan discredit. He knows he's the most trusted LFP guy in this forum. Nobody can assemble best quality LFP like him since his batteries are even better than big brands over years.

8 Likes

Haykay2001: 6:10am On Jan 26

Dont buy the low end own..or jejely go by sms or welion.. Infact all this low end inverter na lucky oo May i no lie you..

toscotech:
Please have used powmr inverter hope is good buy

Lavoca: 7:03am On Jan 26

Dam5reey1:
Na so..

DIY all the way!

Growatts 6kw
jinko 8* 550
Deriy 30kwh..

Inverter and BMS configured to my settings... Balancing set....
Battery parallel communication set...
BMS and inverter communication set...

Hello, please what’s the total cost for this setup and how did you source for them? Thanks

EduTechTainMent: 7:37am On Jan 26

HeavenlyBang:

Leave hybrid inverters alone? No. Leave shitty brands alone.

3.3KW inverter. If you want, I go load am reach the 3.3KW sef to show you say e fit chest am.

Which hybrid inverter is this?

EduTechTainMent: 7:39am On Jan 26

HeavenlyBang:

Leave hybrid inverters alone? No. Leave shitty brands alone.

3.3KW inverter. If you want, I go load am reach the 3.3KW sef to show you say e fit chest am.

What's the spec of this srne hybrid inverter pls?

EduTechTainMent: 7:45am On Jan 26

Dam5reey1:

Learnt about this issue today..

Can you share the Inverter settings, battery type, Charge, Float and cut off that was set..
Did you use communication cable?

The battery has warranty and can be return if battery is the culprit.

Battery is sako. For the other details, I don't know what settings was used. Setup is for a friend

EduTechTainMent: 7:45am On Jan 26

jonescosmos:
Bro, toss this battery ASAP,

I had exactly the same issue with the same model of battery and SAKO 3kw 24V Inverter alongside 8pcs of 450W Jinko s, at nights the battery discharges like it's in a competition, The SAKO Inverter and Battery both refused to obey cut-off points and as such the battery discharges beyond DOD, I thought when day breaks and the sun comes up, the inverter will wake the battery up, but it didn't, client used GEN and NEPA to try to charge the battery, yet no power.

This horrible experience went on for days until I replaced the Inverter and Battery with Felicity IVEM 3KW and 5KWh Felicity Lithium Battery.
Now everything is up and running and the SAKO Battery and Inverter are both laying fallow in my garage.

Regrettably several other people have reported similar issues with SAKO products.

PLEASE STAY AWAY FROM THESE 2 MODELS OF SAKO BATTERY & INVERTER

Hmmn..

Mrreed(m): 7:46am On Jan 26

Easy bro

ask4bk:

Dam5reey1 no fit call Mr. Valtz name though I know na him him wan discredit. He knows he's the most trusted LFP guy in this forum. Nobody can assemble best quality LFP like him since his batteries are even better than big brands over years.

Dam5reey1(m): 7:56am On Jan 26

Mrreed:
Easy bro

Na so jare people are too emotional.

I only show cell behavior if you discharge them below 3V, regardless of the manufacturer same applies across, if he read between the line he will understand say na only Cell I bought, the pack was built by me.

What I was expecting is a someone to come out and show me their pack at 47V, and lets see the Cells behavior, this thread is DIY where we learn not a market place. Where we market or demarket anyone.

I once mentioned this when there was arguments about cells grades and all.

I hinted that most LFP seller will tell you charge to 3.45 and cut off at 3V so as to cover some flaws. Now that is evident.

Many went against the Pack that can reach 3.65V without OVP getting triggered and condemn seller for selling a 14.6V charger.

3 Likes

Dam5reey1(m): 8:04am On Jan 26

EduTechTainMent:

Battery is sako. For the other details, I don't know what settings was used. Setup is for a friend

Those Details are necessary for proper assessments.. battery is only one of the components, Inverter is the major controller.

I have had experience where, the Inverter was Faulty. The Inverter throw up Short circuit which eventually damaged BMS in a Battery. Thankfully the battery seller changed the BMS out of warranty. So sometimes its not always one component.

HeavenlyBang(m): 8:13am On Jan 26

EduTechTainMent:

What's the spec of this srne hybrid inverter pls?

1 Like 1 Share

Dam5reey1(m): 9:09am On Jan 26

[quote author=HeavenlyBang post=133874101][/quote]

120-450V good sign..

1 Like

compunigeria: 9:30am On Jan 26

[quote author=HeavenlyBang post=133874101][/quote]

Pls how would you rate the fan noise in comparison to other similar hybrids like felicity,sako, Cworth or any one you' ve had with before?

brightk(m): 10:49am On Jan 26

Dam5reey1:

Na so jare people are too emotional.

I only show cell behavior if you discharge them below 3V, regardless of the manufacturer same applies across, if he read between the line he will understand say na only Cell I bought, the pack was built by me.

What I was expecting is a someone to come out and show me their pack at 47V, and lets see the Cells behavior, this thread is DIY where we learn not a market place. Where we market or demarket anyone.

I once mentioned this when there was arguments about cells grades and all.

I hinted that most LFP seller will tell you charge to 3.45 and cut off at 3V so as to cover some flaws. Now that is evident.

Many went against the Pack that can reach 3.65V without OVP getting triggered and condemn seller for selling a 14.6V charger.

ur charge curve shud tell u dat there is really notin 2 gain above 3.55v just unnecessary stress on ur cells.. same tin with ur discharge curve

1 Like

Mrreed(m): 11:24am On Jan 26

The major downside of this range is that one needs more s to get it to start charging optimally.

Dam5reey1:

120-450V good sign..

1 Like

Eghosa1(m): 11:42am On Jan 26

gsparks01:
from his post, it seems he has already filed a warranty claim and they sent him a new one.

Correct. Ecoflow usually would just replace.

toscotech(m): 11:52am On Jan 26

Haykay2001:
Dont buy the low end own..or jejely go by sms or welion.. Infact all this low end inverter na lucky oo May i no lie you..

That is the inverter am talking about

Compliant(m): 12:22pm On Jan 26

Greetings

Please I need the help of everyone
Just yesterday I bought 4 pieces of jinko 615kw from fouani

It was installed on 5kva felicity inverter, 2 pieces of 220ah battery and 60ah felicity charge controller

The image below is what my charge controller is showing this afternoon, is this normal or is the connection wrong?

Mrreed(m): 12:43pm On Jan 26

I think you have made some mistakes.

First of all, 60a CC is not adequate for 615w x 4 s. Secondly, even if yiu were to have the adequate CC ratings, the charge ratings will be too high for 2 tubular batteries.

You need to replan

Compliant:
Greetings

Please I need the help of everyone
Just yesterday I bought 4 pieces of jinko 615kw from fouani

It was installed on 5kva felicity inverter, 2 pieces of 220ah battery and 60ah felicity charge controller

The image below is what my charge controller is showing this afternoon, is this normal or is the connection wrong?

HeavenlyBang(m): 12:54pm On Jan 26

Compliant:
Greetings

Please I need the help of everyone
Just yesterday I bought 4 pieces of jinko 615kw from fouani

It was installed on 5kva felicity inverter, 2 pieces of 220ah battery and 60ah felicity charge controller

The image below is what my charge controller is showing this afternoon, is this normal or is the connection wrong?

Image isn't clear but you need a 100A CC ideally for your 2460w PVs. You're bottlenecked by your charge controller.

Also, like the comment above says, you're also limited by your batteries (tubular ideally should be charged at a max of 0.2C, which would be 44A).

Effectively, you are overed. Technically nothing wrong with that since it just means your setup can work at its peak performance even in less than peak irradiance. But it also means you'll never get the full utility of your pv array.

1 Like

HeavenlyBang(m): 1:02pm On Jan 26

Laying your s flat on a roof is an easy lifehack until they start hitting 80°C. cheesy

1 Like

odimbannamdi(m): 1:17pm On Jan 26

Haykay2001:
Dont buy the low end own..or jejely go by sms or welion.. Infact all this low end inverter na lucky oo May i no lie you..

When you say "low end own", what do you mean? Which Powmr inverter do you refer to as "low end"?

odimbannamdi(m): 1:18pm On Jan 26

toscotech:
Please have used powmr inverter hope is good buy

What particular Powmr inverter do you refer to? Please share pics for better advise. Powmr products have proven to be both affordable and reliable over the years

toscotech(m): 1:42pm On Jan 26

odimbannamdi:

What particular Powmr inverter do you refer to? Please share pics for better advise. Powmr products have proven to be both affordable and reliable over the years

This is the one am thinking about