NewStats: 3,259,406 , 8,170,020 topics. Date: Saturday, 24 May 2025 at 09:34 PM 6ft6b

Androblaze, Boss, I need your , or you text me +23481323-94478

fuckboys:
compare yourself

1st is haisic
2nd is bread

These SMS ehn, their power no really reach 1.6kw before it starts beeping overload

mctfopt:


Oh, just that I never saw the load handling capacity of Bread. Would love 's review on that.

What's Bread's PV voltage range?

Hopefully i may get one for test.

fuckboys:
i went for bread, but as per the fans, the bread inverter fans are always running round the clock even with little or no loads on the inverter.
Don't know if it was designed that way.

Thats one thing i like about the Haisic, the Fan is one Bigger and more Quiet.. without much load its silent

fuckboys:
i went to their office myself and checked out both haisic and bread. I'm beating my chest and telling you that bread is a better inverter. Better mppt specs, 60a against 100a, better pv voltage range

Single cooling fan and air vent on haisic against dual cooling fan and 2 air vents on each side on the bread. (This alone means better performance)

I held both on my hands.

Did you buy bread or Haisic?
Also the Fans on Haisic hardly kick in when loaded under 300w. Unlike some 2kva 12V inverters...
The single Cooling is enough Haisic used a lighter casing.

HeavenlyBang:
Make I block person first, I dey come.

Last last everyone go unblock themselves life is too short abeg..

kiekie1:
Brand New Energy efficient Qasa 300w electric iron available!

Best unit price: N15,000


*Location: Lagos state
*Energy Efficient 💯



See details in profile

Baba I get Mercury 200AH Lead battery used, you may come pick up as usual.
you never blocked me for here

AndroBlaze:


Dam5reey recently did a video of the 1.5kw Haisic inverter carrying an inverter AC rated 1.5hp on a battery of only 100ah till it died (over an hour)! Lets see a lead acid lover try that test with even a 200ah battery!

It seems that Haisic inverter is the real deal so you maybe able to get away with it occasionally.

The Voltage drop wont allow it cause I pulled 100A continuously with. lead acid can barely do 20A to 40A.. if we go beyond na LVD straight

During my testing, I was powering about 400w load which included freezer and some load, my people dont know I was testing, they went ahead and Iron 1000w, so making total load 1400w.. the Inverter didn't shut was only beeping.

It also took Surge if 1.7KW without shutting. Not saying this to market but if the inverter survived this torture, then I can conclude it will last well when used within recommended specifications and more conservative way.

Another one, DEYE SUN-6KW AM2..

Bring your orders na only 1M

swagifted:
when you started your "research" it was still 545k

To even see am for 675k now na war.

We are still delivering... Just for sake of posting

DEYE SUN-6KW
LVTOPSUN 15kwh
Fouani also deliver 8 s

Creditalerts:
Cworth or fireman battery which is better to buy pls help

Firman.

fuckboys:
everytime grade a grade b, i don't even understand what the noise is all about.

Not even like you're using the battery pack for high voltage applications like hybrid vehicles or electric cars, it's just home storage system.

Most of you here will even die before you degrade even a grade C lifepo4 batteries on just home storage.

It's a very good deal and we all know it, nothing beats it currently in Nigeria based on pricing.

Me just look away at this point, cause the cell that give me 290AH from 280AH, in capacity test is already a .
There is another popular brand that only tested 268AH from a 280AH Grade B,D cells I and Stopped recommending it altogether.

I also import cells as well, for DIY person,
Grade A cells from China is 45USD max for 280AH per cell. So if a pack with Non smart BMS sells for 450k and test full capacity then its a good to buy already.

adrusa:


The only way to know what is happening to your battery pack is to see the voltage of the individual cells. Cell balancing basically tries to equalize the voltages of all the cells. Without the ability to know the individual cell voltage, you will not know whether your pack is balanced or not. Most battery packs will fail because one or two cells are dead or dying.

These only applies to DIY people, who are using Crude tools to build batteries, If you use correct tools, all the way to machines laser welded I don't see really why people should care about cell voltages.

All I am saying is LFP works!
less than 5% of s care about cell voltages, most dont even understand what to look out for so whats the point?

Well built packs with BMS and ive balancers works without issues for years.

HeavenlyBang:


Good for troubleshooting.

So the battery has no screen or communications? How is SoC even checked?

That is why the pack is Cheap.
If your battery is Full capacity you will understand the usage pattern in no time.

Only few of us even understand what cell, SOC mean. Even the percentage on our phones not sure we pay that much attention

omotoda:


Asides cell voltage , it is just helpful in knowing what is going on in the pack.You know your charge currrent, voltage, etc. I think every it just makes life easy sha.

Cant last time I checked cell parameters.
95% of don't need that level of information

Its like paying attention to your heartbeat.

HeavenlyBang:


This Haisic doesn't have a display at all fa? How would you check cell voltages on it?

Checking cells voltage is overrated, for me sha.

redgem:


Do not open the battery!!!.....it is not a wise thing to do since there's a dispute, if you open it, you've faulted!...find a way to get evidence that the battery isn't what you paid for....report to gistlover, there are s on X that helps with such issues, make research and tag them...go on Facebook and report to blogs...

But, the Batteries was already opened, warranty seal already broken.
Opening it is just for him to be sure and have his evidence as well.

fuckboys:
why preset the battery at 280ah when it can pull 290ah?

We will cut off at 12V

Don't Buy Lead acid in 2025 abeg..
We just replaced a Lead acid with this

It only managed 52,369AH, approximately 261 Cycles less than 2 years e don degrade to 10% capacity

Now we have installed 3.6kwh with 1.5kva Hybrid

bbally:


Hello, what is your review on this firman / itel inverters on inductive loads and surge startup of AC compressor.

Do you have any recommendations on a 4kw/5kw hybrid inverter on 24volts?

You can buy the transformer based. If the Major Load are inductive ones.

BIY installation completed

We are still delivering as at the same time.

mctfopt:


$71 then. ₦ was so cool then. Oh well.


Before that bought two Fangpusun in 2016. Still kicking today.

That was nice ..the price didn't change much self..

mctfopt:


I have a MakeSkyBlue type of this SCC. That thing refused to die. 2018 and still kicking.

They were not meant to die actually..
You can check the USD you got it then you will know it was not Cheap.
Most want cheaper and last long products now.

KudozInteriors:


After this, what next sir?

We will know when you Open

KudozInteriors:


The distributor just said another thing; that he cannot even expose the PRO again and protect us. That after the business is done, we will go home and leave him with the PRO to deal with.
He is complaining that we are involving more people in the case and that it’s pissing him off.

My ogas, please help me.🙏🏼

What do I do now?

Open the batteries, and what is what is inside..
The batteries has been compromised, there is no warranty seal again.

toscotech:


Do you have growatt inverter 6kva if yes how much

E no dey, we have Deye 6kw 1M sweet device.

Juror:


is that a 14kWh battery on the bike ?!

The Guy rugged am oo 14.3KWh Deriy

Oshomo12:


If I may ask, What exactly do you need? Just list them out: 1, 2, 3....etc

I wish he will collate all the response and post as a Book. At the end of the Research. The book will be best selling for beginners.

He has kuku blocked me

Out for delivery

12V 100AH Taico - 220k
12V 100A LVTOPSUN - 230k

AndroBlaze:


I said I wasn't going to put mouth in this again, but your wife is wrong.

The installer was part of it, there is no doubt, unless he is truly an electrician and an illiterate, that's the only way you can exclude him.

They likely just removed the cells in the Sukhig battery you rejected and transplanted them into the Sako casing, which is why that battery will even struggle to do the 2.5kw for 100amps sef!!

Please, like I said, make sure the lessons you learn from this experience exceeds the money you've temporarily lost ooo.

They have packed Fufu and Concrete inside the Sako

Oem18:


Why?? If you cannot satisfy his quest for knowledge step aside. You yourself did not become knowledgeable overnight.

The research he has made so far on this thread has been quite captivating and will help future newbies.

Research?
The new block feature make sense Sha..