NewStats: 3,262,751 , 8,178,060 topics. Date: Tuesday, 03 June 2025 at 01:11 PM 6v575m

Hi gurus please I need to install FTA channels with my Dstv decoders. can it work or do I use strong. Please advice

houzing:
Hi gurus please I need to install FTA channels with my Dstv decoders. can it work or do I use strong. Please advice

Kindly go for strong decoder.

Emmaculate20:
Kindly go for strong decoder.

thanks sir. Please can you give me the current setting

houzing:


thanks sir. Please can you give me the current setting

You re welcome, pls current setting of what? kindly break it down.

Emmaculate20:
You re welcome, pls current setting of what? kindly break it down.

STrong decoder settings.

houzing:


STrong decoder settings.

Hmm... Go to settings in your box, search for manual settings inn & key in all what to.

olenyi:


Set up ur 90cm dish and get joy tv as instructed above. Optimize the signal by fiddling with ur lnb to get the max signal possible. Then under Eutelsat w6, input 11881 v 27500. Then standing at the back of the dish, raise it up a bit and a little to ur right. When u hit green, tighten, and try to max the signal also. Then input 11024 H 03333. Make sure this is also green but don't optimize. Around 55 - 60% is enough. Go back and make sure that the first frequency is still over 75 - 80%. Then blindscan.

When it must have saved all the channels, get ur Diseqc switch and connect this dish to port 1. Connect the joy tv dish to port 2. Then connect ur receiver to the receiver out port.

Now go to menu, installation, select dish setting. select Eutelsat w6. Scroll down to the two Diseqc settings and set their port numbers to 1. Exit and save. Do the same for astra 1N/2abd and set the Diseqc to 2.

Exit and save. Exit all and enjoy. Cheers.

If u get all this in one go, then the ''spirit of FTA'' is in ur blood.

Regards.

Nice