NewStats: 3,264,442 , 8,183,730 topics. Date: Wednesday, 11 June 2025 at 06:31 AM 6zo6h

Client...Kenny please get me a conduit pipes that doesn't break when bending... here you go sir but but price double the popular one?

Go ahead
Thank you sir

EgunMogaji:
Can anyone guess the dimension of the footprint of this house?

Thanks.

l think 35 *15ft

Oga spyder tnx a lot sir. I really appreciate

I salute house. I took a total chill out break and came back to a long queue and to do list.

I hope say its been interesting as usual.

This is my plumber. A fast worker and takes pride in his work. He can do the rain water pipe connector his tel no is 08169940298 Abbey.

fash78:
hello house. I need to do window and door shield to guide against rain water. I also need to install rain water pipe connector round my house.
If you are competent in doing this plesse drop me message here and I will you.
Thanks

Send email to like 2 -3 coys ask for a written price and then play them off each other I got a 30percent discount once on this.

EgunMogaji:


I hear you loud and clear and I’m in complete agreement.

Factory direct is the ultimate decision even if it costs a little bit more.

allCopacetic:

Happy to help Chief.

Your meters don't have to be together by the way, You can apply the fuse units method and still have your meters located anywhere you want. You just need to decide which is more efficient (neater, cost effective etc) for you.

The key thing is the supply is going to go from one set of fuse units to the other (Using 16mm alum or even the same size of load cable if you still have some left) then go from the fuse
units to the meter. So you're looking at 3 sets of fuse units (totalling 9) and 3 neutral connectors.

If you had individual supply cables for all the meters it wouldn't be a must for the supply to enter the fuse units first. It can enter either the meters first or fuse units ( Which in this case act as phase changers or phase selectors)

But since you have only one supply cables it cannot enter the meter first.

Nepa tupically will not agree to the connection if not to meter from pole. Unless you want to keep paying egunje as they will send new or different staff to you who will query the connection.

gabbytabby:
This is my plumber. A fast worker and takes pride in his work. He can do the rain water pipe connector his tel no is 08169940298 Abbey.

Thanks so much

mufutau55:


This is lovely though.

Hajji M.

Got some new designs. I was told the price is N60K fabrication and installation. I think this is too expensive.
Does anyone have idea on fair prices for these types of window/door shields? Location is Lagos.

fash78:

Got some new designs. I was told the price is N60K fabrication and installation. I think this is too expensive.
Does anyone have idea on fair prices for these types of window/door shields? Location is Lagos.

Damn too expensive!
Shouldn't be more than 20-25K each!

Maybe they should break down the cost (separate Fabrication from installation) so one can really appreciate how they arrive at such cost.
Imagine, it is twice the price of TWO standard Casement Windows!

But it looks really nice.


BTW: These last pictures are not Aluminium, they look more like wrought Iron to me.

gabbytabby:
Nepa tupically will not agree to the connection if not to meter from pole. Unless you want to keep paying egunje as they will send new or different staff to you who will query the connection.

It shouldn't be a problem if It doesn't contravene any of the installation guidelines.
The path along which the cable runs....( from the pole all the way to entering the meter) must be external and clearly visible .
Multi unit apartment buildings that share a supply/service cable must have a Busbar Chamber or a similar stepup. There's no way around it.

Long time Madam Gabby

fash78:

Got some new designs. I was told the price is N60K fabrication and installation. I think this is too expensive.
Does anyone have idea on fair prices for these types of window/door shields? Location is Lagos.

I think i prefer the design in The very first picture. The one with a grey coloured frame that looks non metal.

It's simple and still stylish

GoodFaith:

called Coleman last week but it was late
got this prices the next day
1.5mm----N8232
2.5mm---N13575
4mm-----N22430
10mm----N54,222

We will be having an Independence week discount sale, For factory pickups only, on purchases 300k and above. From the 2nd to the 7th of October

Details will be available here before close of Business today.

That is correct.

allCopacetic:

It shouldn't be a problem if It doesn't contravene any of the installation guidelines.
The path along which the cable runs....( from the pole all the way to entering the meter) must be external and clearly visible .
Multi unit apartment buildings that share a supply/service cable must have a Busbar Chamber or a similar stepup. There's no way around it.

Long time Madam Gabby

fash78:

Got some new designs. I was told the price is N60K fabrication and installation. I think this is too expensive.
Does anyone have idea on fair prices for these types of window/door shields? Location is Lagos.

I love all the designs... I am sure it can be negotiated down from the 60K though.
I did an emergency aluminium type for the BQ back door when wind was blowing water inside for N30k for two doors (15k each), but not nice looking this ones o.

Hajji M.

allCopacetic:


We will be having an Independence week discount sale, For factory pickups only, on purchases 300k and above. From the 2nd to the 7th of October

Details will be available here before close of Business today.

It’s nice to have you back Madam Gabby.

Now we need 3Strike, Lastpage, etc

EgunMogaji:
It’s nice to have you back Madam Gabby.
Now we need 3Strike, Lastpage, etc

Maverrick, Bra (what?) Will be full house again.
But I guess we only see people when they are building...

Hajji M.

mufutau55:


Maverrick, Bra (what?) Will be full house again.
But I guess we only see people when they are building...

Hajji M.

That or when rofo rofo dey

[quote author=Daboomb post=60922853][/quote]

Ha ha ha ha
Which one be this

allCopacetic:


We will be having an Independence week discount sale, For factory pickups only, on purchases 300k and above. From the 2nd to the 7th of October

Details will be available here before close of Business today.

Apologies for the late update.

Pursuant to my earlier post, In Celebration of our great country and it's "Independence" and in appreciation of our very kind customers, the following prices will apply for Sales under the described .


Happy 57th Independence Day Celebration

mufutau55:


Maverrick, Bra (what?) Will be full house again.
But I guess we only see people when they are building...

Hajji M.

Kai,{Bra ke-}Those are the old school that always keep these forum alive with great ideas and respective argument.

allCopacetic:

Apologies for the late update.

Pursuant to my earlier post, In Celebration of our great country and it's "Independence" and in appreciation of our very kind customers, the following prices will apply for Sales under the described .


Happy 57th Independence Day Celebration

It's not just that you are a knowledgeable expert in electrical affairs, you're also an astute businessman. Happy sales.

spyder880:


It's not just that you are a knowledgeable expert in electrical affairs, you're also an astute businessman. Happy sales.

Thank you so much my oga.
God Bless

twinskenny:
Client...Kenny please get me a conduit pipes that doesn't break when bending... here you go sir but but price double the popular one?

Go ahead
Thank you sir

This pipes are very expensive oooo....The pipe is very strong and it doesn't break when bending. I used it for a bank recently.

Any would be appreciated. I have received some advice from good gentlemen here before, so thanks again. Attached is quote for Roofing gutter system. The building is 58 feet by 40 feet, is quote reasonable or over price for a job in Imo state.

topsy23:


This pipes are very expensive oooo....The pipe is very strong and it doesn't break when bending. I used it for a bank recently.

w

Please what's the brand name f the pipes, also what is the price range,lenght,diameter and how many are in a batch

Cheers

Flaghouse1:
w

Please what's the brand name f the pipes, also what is the price range,lenght,diameter and how many are in a batch

Cheers

The pipe is dignity UK
20mm is 5800/bundle
25mm 7500/bundle
length is 3m
25length per bundle

Diameter is are 20mm and 25mm.

topsy23:


The pipe is dignity UK
20mm is 5800/bundle
25mm 7500/bundle
length is 3m
25length per bundle

Diameter is are 20mm and 25mm.

Thanks for sharing the prices.

http://www.dignityplasticindustrylimited.com/conduit.html

topsy23:


The pipe is dignity UK
20mm is 5800/bundle
25mm 7500/bundle
length is 3m
25length per bundle

Diameter is are 20mm and 25mm.

Thanks bros,why all these our plumbers and electricians dey quote millions of Naira for electrical and plumbing work if these inputs(PVC pies) are fairly priced

tsiriman:


Please where did you get this ABB DB that is made in England?

ABB doesn't do any Low Voltage product manufacturing in Britain. It is also not a British brand. ABB is Swedish.

Original ABB boards have enclosures predominantly made in Egypt and India. While most of the MCBs are made in .

Unfortunately you have the exact same inscriptions as seen on the authentic product replicated on the counterfeits ( made in , made i Egypt etc).
Don't buy an ABB board here that is described as "Made in England" its a ruse.