NewStats: 3,262,440 , 8,177,156 topics. Date: Monday, 02 June 2025 at 10:02 AM e493n

This thread is opened as a platform for fresh graduates of petroleum engineering to interact, and get information about the various job opportunities in the Oil&Gas industry for petroleum engineering profession. It is expected that the experienced ones in the industries will help out with information on career opportunities in petroleum engineering and how such jobs could be landed.
Also, it would be appreciated if the salary range
of various companies can be discussed.
your contributions is highly welcome.

SPE! Oil&Gas!!

Hi every1.... we knw jobs are getting scares in d industry based of some operations being shutdown and all, but I also knw dat a few companies are expanding... let us do well to post dos jobs here
SPE--- oil and gas

abiambo:
Hi every1.... we knw jobs are getting scares in d industry based of some operations being shutdown and all, but I also knw dat a few companies are expanding... let us do well to post dos jobs here
SPE--- oil and gas

hello abiambo, you are welcome to petroleum engineers thread. are you a petroleum engineer?

Do you the best place to get Oil & Gas vacancies is here http:///949vvE...you can thank me later

Timynder:
Do you the best place to get Oil & Gas vacancies is here http:///949vvE...you can thank me later

Are you in the industry already? please share your experience lets graduates petroleum engineers and others learn from you. thank you

Timynder the link u gave is not opening, please crosscheck it and resend. thanks

S.p.E

Mud engineer/ gas engineer

petengine:

hello abiambo, you are welcome to petroleum engineers thread. are you a petroleum engineer?

Error msg... review d link u posted

Timynder:
Do you the best place to get Oil & Gas vacancies is here http:///949vvE...you can thank me later

Ahmed4002:
S.p.E

Oil&Gas!!!

abiambo:
Mud engineer/ gas engineer

wow, nice meeting u Sir. any experience and advice you can share to us the graduates yet to break into the industry?

get industry specific certifications till u get a job, that way you'll hit the ground running

petengine:

wow, nice meeting u Sir. any experience and advice you can share to us the graduates yet to break into the industry?

abiambo:
get industry specific certifications till u get a job, that way you'll hit the ground running

I will appreciate if you can be more specific on which type of certification for a fresh graduate with zero experience. Thank you

it depends on you, really what aspect of peteng do you have flair for and would really love to work in,
for example you may have a knack for drilling so after service you can do IWCF level 2 or IADC and then mud engineering, you may like reservoir then you can find a company there are a few (not sure of late but i can find out) where you can learn how to use industry standard softwares (wireline, logging, mwd, lwd softwares), if its production thats your thing you well i really dont knw where you can do any training on that cos am not really drawn to that aspect of d industry, is it ''completions'' you like, seismic evaluation, name it
know what you have ion for and let that drive push you to want to know more in that field, if you search the internet am sure u will get alot more info than i can give
NB getting rig time is quite something so if your first job on the rig is rough neck, dont reject it, any rig time is better than no rigtime, + it will make you know first hand what goes on on a rig, what equipments and all,

petengine:

I will appreciate if you can be more specific on which type of certification for a fresh graduate with zero experience. Thank you

abiambo:
it depends on you, really what aspect of peteng do you have flair for and would really love to work in,
for example you may have a knack for drilling so after service you can do IWCF level 2 or IADC and then mud engineering, you may like reservoir then you can find a company there are a few (not sure of late but i can find out) where you can learn how to use industry standard softwares (wireline, logging, mwd, lwd softwares), if its production thats your thing you well i really dont knw where you can do any training on that cos am not really drawn to that aspect of d industry, is it ''completions'' you like, seismic evaluation, name it
know what you have ion for and let that drive push you to want to know more in that field, if you search the internet am sure u will get alot more info than i can give
NB getting rig time is quite something so if your first job on the rig is rough neck, dont reject it, any rig time is better than no rigtime, + it will make you know first hand what goes on on a rig, what equipments and all,

I actually have a flair for reservoir engineering. I ed laser engineering in port Harcourt that deals with industry softwares but their training cost is quite expensive. to train on eclipse 300 was close to 1M. I met a former colleague who grad from my school that was ready to offer me such training at low cost but my fear was that he was not going to issue me any certificate. do u think having the knowledge of petroleum engineering softwares without certifications is really worth it in Nigeria where certificates are most preferred to the know how when it comes to job placement?
Thank you for your time

laser is quite expensive, but except ur friend is terribly cheap knowledge w\0 certificate is tricky but no knowledge is lost, you can always add it to ur strenghts inn ur cv but going through professional training is really an added advantage, and again how much does he knw about the software has he used it in d field b4

petengine:


I actually have a flair for reservoir engineering. I ed laser engineering in port Harcourt that deals with industry softwares but their training cost is quite expensive. to train on eclipse 300 was close to 1M. I met a former colleague who grad from my school that was ready to offer me such training at low cost but my fear was that he was not going to issue me any certificate. do u think having the knowledge of petroleum engineering softwares without certifications is really worth it in Nigeria where certificates are most preferred to the know how when it comes to job placement?
Thank you for your time

abiambo:
laser is quite expensive, but except ur friend is terribly cheap knowledge w\0 certificate is tricky but no knowledge is lost, you can always add it to ur strenghts inn ur cv but going through professional training is really an added advantage, and again how much does he knw about the software has he used it in d field b4

good morning senior colleague, hope your night was great. I can't really tell if my friend has in depth knowledge of the software but he claims he has used it before to simulate a practical field problem as he has access to some field data that enable him to run the program.
May u have a great day!

Hello House, I want to enrol for General HSE in port Harcourt. which of these two training center is good to go in of their certification being well recognized by multinational oil companies.
1. NISP
2. Oiltrain
you can also suggest any other one that is better than the above mentioned. Hope u have a great day

Be amongst the TOP PLAYERS in the OIL and GAS industry + Certificate to be issue after the training.


Apply for a Training in HSE LEVEL 1, 2 and 3/international Certification (N25000).


Trainings to be Held in Four(4) States: Lagos State, Delta State, Abuja and Rivers State.


Visit http://www.nigeriatrainingnetwork.com/events/hse-level-1-2-and-3international-certification-n25000/ for more information.


Let the Professionals do the JOB and be CERTIFIED

Nigeriatraining:
Be amongst the TOP PLAYERS in the OIL and GAS industry + Certificate to be issue after the training.


Apply for a Training in HSE LEVEL 1, 2 and 3/international Certification (N25000).


Trainings to be Held in Four(4) States: Lagos State, Delta State, Abuja and Rivers State.


Visit http://www.nigeriatrainingnetwork.com/events/hse-level-1-2-and-3international-certification-n25000/ for more information.


Let the Professionals do the JOB and be CERTIFIED

is your training program accredited?

petengine:

is your training program accredited?

Yes our trainings are accredited.

Nigeriatraining:

Yes our trainings are accredited.

accredited by which body, and who are your partners?

petengine:

accredited by which body, and who are your partners?

Log on to our platforms and see for yourself all our engaged and certified partners.
www.nigeriatrainingnetwork.com
www.nigeriatrainingcourses.com

These are the type of threads and topics i love. Let me stay here and learn from my bosses.

Champella:
These are the type of threads and topics i love. Let me stay here and learn from my bosses.

you are welcome onboard.

petengine:

accredited by which body, and who are your partners?

visit www.nigeriatrainingcourses.com and www.nigeriatrainingnetwork.com to see the list of all our engaged clients.

For those interested in learning more about the oil industry,I will recommend that of the premier pipe manufacturer,Tenarix which owns Tenarix University learning course on edx. It is called the Oil Country Tubular Goods (OCTG) series,the first has ended,and the second course called ''Introduction to Steel'' is wrapping up,and you can still take part. The third course,''Introduction to running pipe in holes'' is currently on. You will need a PC because some of the exercises involves drag and drop which can't be done on mobile phones. Just Google Tenarix University or visit www.edx.org
Goodluck to you all.
Cc davide470

marcondo13:
For those interested in learning more about the oil industry,I will recommend that of the premier pipe manufacturer,Tenarix which owns Tenarix University learning course on edx. It is called the Oil Country Tubular Goods (OCTG) series,the first has ended,and the second course called ''Introduction to Steel'' is wrapping up,and you can still take part. The third course,''Introduction to running pipe in holes'' is currently on. You will need a PC because some of the exercises involves drag and drop which can't be done on mobile phones. Just Google Tenarix University or visit www.edx.org
Goodluck to you all.
Cc davide470

is it online learning course?

petengine:

is it online learning course?

Yeah. It is an online course and it is free just like that MOOC sponsored by IFP and TOTAL. I guess a Continued Professional Training certificate from Tenarix will look nice on your CV. All you have to do is on the edx platform,,search for the course,enrol,and click on the ''view course'' icon. Then,you are ready to start.

marcondo13:


Yeah. It is an online course and it is free just like that MOOC sponsored by IFP and TOTAL. I guess a Continued Professional Training certificate from Tenarix will look nice on your CV. All you have to do is on the edx platform,,search for the course,enrol,and click on the ''view course'' icon. Then,you are ready to start.

thanks. I'll do that. when is the closing date for application and what are the requirements for registration? thanks

petengine:

thanks. I'll do that. when is the closing date for application and what are the requirements for registration? thanks

no requirement. Just your email address and the usual personal info. I think the course will end on October 10.