NewStats: 3,261,619 , 8,174,527 topics. Date: Thursday, 29 May 2025 at 07:25 PM 3g4g4f

Penuelseun:
Yes it is broadband, how do you subscribe to yours?

I buy from a data vendor

Penuelseun:
still working

is it a broadband subscription?

Mine works with normal subscription but doesn't work with broadband subscription

Penuelseun:
If you don't know something, ask, not tagging people liers due to your own ignorance. I bought a broadband modem a while ago from Jumia but in the process of ing the sim that came with it, it was discovered that the sim was bad. I went to MTN office in Ifo to complain and I was told to buy another sim which the customer care rep helped me in migrating it to the broadband plan after registration. Still using the sim up till date. Totally different sim with a totally different number

is this still working for you? Mine stopped working this afternoon

Obiykee:


Your last statement isn't true, i bought Mtn 4g router frm their office, the sim attached is bad, I was ask to check back so it can be fixed, they send signal/mail.. I check back few days later, while waiting for days, I use my other mtn sim on it, after exhausting the existing data on the sim through the router.. Sub broadband data on it, .. Inshort I do swap sim on it now when using..

is this still working for you? Mine stopped this afternoon

Donbigi2:
Opened to confirm item, unactivated
iPhone 16 Pro 128gb esim sim
NGN 1.45m

Mint
iPhone 15 |128GB| Factory Unlocked
NGN 880,000

MacBook Air 2020 8GB/ 256GB
M1 chip
NGN 740k x3

WhatsApp 07050757709

location?

[quote author=mayemaye post=134435609][/quote]is the macbook air Nigerian used? What's your location?

Valto:
12v 142ah 1.8kwh lifepo4 lithium battery available 390k
12v 280ah 3.6kwh lifepo4 lithium battery available 660k
12v 4.2kwh lifepo4 lithium battery available at 740k
all made with JK smart Bluetooth bms !

the 142ah is within my budget. What's the cycle and how many years guarantee?

Where can I buy long lasting 12v 150ah or 200ah lifepo4 battery?

uwaifou:


their customer care service. [email protected]
[email protected]

I did as you requested and I just got a call from a number informing me that my FBNquest has been approved. And I also received this email in my spam.

Is this legit?

uwaifou:


Stanbic 2021
Quantum zenith 2yrs now
Norrenberger a year and a half ago
United capital same as above
FBN quest 2019

I have been fiddling with all and they all have one challenge or the other and i drew my conclusions and zored in on FBN quest the last two years.

My brother they really stand out

how do I for Fbnquest?

kingreign:


Lexus do not use MAP sensor. They employ the use of MAF sensors. Glad you found solutions to the challenge. If you replaced the MAF sensor, pls replace ethe engine air intake filter. It most likely had been clogged with dust and that would be the most likely reason you had a MAF sensor failure.

yeah, it was very black, I changed it too.

2cribz:
Fuel pump
Expired plugs
Carbon filled knock sensor
Low gas
Vacuum leak
Catalyst block
Tps failure
It doesn't do slow or idle,rather it dies.
Fuel pump
Battery
Alternator
Or patakpata
Engine don sapa

the culprit was the MAP sensor. All fixed now.

2cribz:
Fuel pump
Expired plugs
Carbon filled knock sensor
Low gas
Vacuum leak
Catalyst block
Tps failure
It doesn't do slow or idle,rather it dies.
Fuel pump
Battery
Alternator
Or patakpata
Engine don sapa

it idles well. I hope it's a vacuum leak cos while changing my knock sensor, the mechanic mentioned the pipe that connects to the air filter has a cut

I finally fixed my knock sensor issue on my ES300 and 5 days later another issue sprung up.

If I start my car and press the throttle to drive out, the car acts like it's about to die and sometimes it does.

If I allowed it to idle for like a minute or two, it doesn't do that.

What could be wrong? I have no check engine light.

emmasoft:

Norrenberger Dollar Fund

As you get gifts in dollars during this festive period or you came home with dollars, to invest some
wisely so that you have gift that keeps giving.

Invest in the Norrenberger Dollar fund at 10.03%. You have opportunity to reinvest (compound) your interest.

Find the opening form attached.

how is the dollar fund funded? With naira?

Abbeyismo:

There's a way to test that type of knock sensore manually,first make sure the sensore is okay first.
Check the wiring
Check all the fuse just to be sure
If all is fine get another ECU and test ur problem should solved.

how do I check if it's ok?

Guys my Lexus ES300 is having trouble accelerating and I scanned it and it showed the problem is knock sensor. I have tried different knock sensors and it still shows the same issue. I don tire. What can I do?

Guys my ES300 is having trouble accelerating and I scanned it and it showed the problem is knock sensor. I have tried different knock sensors and it still shows the same issue. I don tire. What can I do?

codemaster2much:

how is the fuel consumption

I work from home so I don't drive it much. I spend like 30k monthly on fuel

dolarland:
Good day
Someone wants to sell his es 330 for me @ 2.5million. base on man know man
It's my first car to own..
My drive way will be mostly highway.. like 70% of the time.. I'm extending my business off town about 21km... 32minute drive
How unna see am??

it's a good car if it's still in good shape. I currently own and drive one

Please where can I get this knock sensor that will work for my es 300. I have changed these sensors up to 5 different times and none worked. I want to solve this check engine light once and for all.

Location: Anambra

Valto:
fully coupled 12v 280ah 3,584kwh, 24v 280ah is available now



12v 105ah 1,344kwh
12v 150ah 1,920kwh
12v 210ah 2,688kwh
12v 300ah3,840kwh
24v 105ah 2,688kwh
24v 210ah 5324kwh
24v 300ah 7,680kwh
48v 105Ah 5324kwh
48v 300ah 15360kwh
48v 280ah 14336kwh
will be available from next week.. all made with high quality cells, with all pulling above capacity, according to test performed on them.

okay. 12v 210ah is how much?

Valto:
Eve 105ah lifepo4 lithium battery cells available
GOTION 300AH lifepo4 lithium battery cells available at affordable prices. discount on quantity.

whatsapp 08020574628 or telegram@vvalto

do you have a fully coupled 24v 150ah battery?

dollarnaira:


You still didn't get the point.
See enh right now:
Today 26/3/24 12:05pm
115w freezer
50w tv
12w tv box
2 rechargeable fans
1 100w peddling for sewing

All working... On just 100ah LifePO4.

You cant try it with 220ah tubular.

N.B 3 days ago I plugged in 1250w hair dryer.
Try this on 220ah tubular e go pack up less than a year. THIS IS THE POINT!!!

which inverter do you use?

Ominie:



https://www.reddit.com/r/S21Ultra/comments/13j2tje/s21_ultra_no_software_update/

Thanks bro. I read further and saw that the S918U is still tied to Verizon even if it is unlocked and at that, only Verizon can send you software updates, and to get software updates from Verizon, you must have the Verizon SIM card in the phone. I went ahead to flash the S918U1, which is the unlocked version, and get updates directly from Samsung. I am now on the latest version. Thanks for the help!

I bought an S23 Ultra last week which is currently running on Oneui 5.1 and Android 13 and I haven't received any software updates yet.

I have tried Smart Switch and no update was found. OTA says Software is up to Date.

I did an Imei search which says my phone is carrier unlock via Verizon. My model number is SM-S918U.

What can I do to receive software updates?

aboyaji:


How do you feel posting your items without price?

doesn't make sense at all

Can I mount solar s on my balcony? It's facing south east. Can it be able to generate enough juice?

MeineMutter:


The door is oversized. I doubt if adequate measurements (of the door opening vis-à-vis the thickness of the doorframes) were done before buying or fabricating the door.

There are a lot of fixes.

One could be costlier than the other. The cheapest may be to thin-down the frame to allow key spinning, since you insist on being able to rotate the key.
Because your aim is just for the to turn or spin, taking off about 5 to 10mm of material from that doorframe may be help but it may deface or distort the thickness of the frame compared to others. I doubt if the frame’s thickness is up to 2 inches.

I still wonder where the door spindle will lock into spindle plate in the doorframe because the picture you shared is not showing where the door engine is locking into, as I have said earlier. Is it locking into the wall brick or into the wooden frame because that door is oversized?

It would be good if you can share the pix of where the spindle will lock into (that’s if there is any). If there’s none, the next fix may be to remove the frame completely and let bricklayers take of some bricks from the wall to accommodate the wideness of the door. This will be expensive than the first fix sha.

To do that, you need to properly know which side of the doorframes would be perfect to brake-down its bricks. It’s not compulsory the expansion is done at the side where the door engine is. Check with your bricklayer to know which side is safer, considering so many things e.g closeness to another wall or concrete or column.

You may end up condemning the frame bracket (the bar) because it will be shorter after expansion/pulling down of the bricks.

Expect more damage to the doorframes, if you have used conventional nails in ing them together. Whoever is handling the repair has to be careful.

Please try and share the pix of where the door will lock into. Let’s see if the frame can be reduced to 1-inch thickness at that side and be able to accommodate the door.

thanks for the breakdown. The spindle locks into the wall. I will snap more pictures tomorrow when I get there.

michlins:
This is an issue I encounter every day as this is my work. The frame is the problem and the welder should have fixed it earlier

what can be done at this point?

diordaves:


Wahala dey o. Na who install the door?

It is a wrong size of door. The door is bigger (wider) than the opening.

Take down the entire door and frame. Knock back the wall to widen the door opening to the appropriate width. Install back the frame, dress it and hang back the door.

If the door comes together with the frame (metal door), take the whole thing down, widen the opening to the right size and install again.

If all the above is not the case, check the hinges. The hinges may be out of sync and loose. Check the screws and tighten.

ah. It's a new apartment I just paid for. Noticed the issue yesterday after payment