NewStats: 3,263,788 , 8,181,404 topics. Date: Saturday, 07 June 2025 at 10:20 PM 6b3n73

is it not dangerous for Keke to be plying such road?

SoftHeart:


Congratulations on the decision to start!
Brace up for the challenges and rewards ahead

Battery cage system is better and costlier. Though it has its own disadvantages, but in my opinion the advantages sures the disadvantages.

1. For a good deep litter you don't need any constant supply of wood shavings, just get a good amount of wood shavings to sufficiently cover the whole pen to about 2 inches depth, and add some charcoal.

2. Make sure the pen is proper built-in to prevent rain from entering and avoid water slippage from the drinkers.

3. Once this is properly done, just move in your birds and you don't need to add additional wood shavings throughout the production period.

4. This is what I'm currently using. We moved in the birds at about 11 weeks, they're now about 80 weeks, no odour, and litter is very dry.

5. Note: if you don't have enough wood shavings to sufficiently cover the whole pen to a good depth and you can't control water spillage, you'll struggle with terrible odour, and your birds will get sick from time to time.

Conclusion: Battery cage system will save a lot of stress, but you also need to clean up the droppings regularly.

Thank you very much for this insight.

I have decided that i will cage them at about 12 weeks of age.

For the 3 month that they will be on the deep litter, your counsel will be adhered to.

I have already installed nipple drinking line in the house.

SoftHeart:

They're very expensive, particularly the imported ones. I do deep litter system and it's odourless.

I am about to start my layer farm. plan is for only 300 birds on deep litter (although i was advised to fabricate cages instead).

My problem now is that i am having challenge with accessing a steady supply to wood shavings. All the saw mills around me only have the smooth saw dust like 99% of the time.

question is, how do you cope with shortage in having wood shaves? how dangerous is it to put saw dust? should i just fabricate the cages and avoid possible wahala?

if no be limited funds wey dey embarrass person, this is the kind of vehicle ownership behavior that i like.

Nice thread OP @port443

aieromon:


This is the 13 pin variant.

Alright, thanks.

Argument ended already. its a 2gr-fe engine mounted on the "13pin' transmission/gear box.

aieromon:


U250E aka 13pin is a 5 speed transmission.
U660E/F aka 22pin is a 6 speed transmission.

The 2GR-FE engine on the RX350 is mated to a 6-speed transmission.

We were specifically refering to the rx350 below, not the recent 2010 and above model year.

You mean it's six speed, 22pin?

I had an argument with a friend this morning, where he said all Toyota 2gr engines are mounted to the 22pin transmission.
But what I read online is that it is actually mounted to the 13pin gearbox.

Does anyone here know the transmission on the 2008/2009 lexus rx350?

jude33084:
If you are in Benin avoid white paints


Gold or ash is better

Abeg bros, you fit recommend solid oven bake workshop for me for Benin city. I have a Rav4 that needs baking...

Obnoxious2001:


If you don't mind I can come over.
I reside in warri

Please Hit me up on 08060346648 (WhatsApp/call)

I need a solar installer in Benin city.
Somebody please recommend someone that is good for me, please. 🙏🏼

Good evening Gazzuzz and other life saving tech gurus in the house.
My car's brake/tail light has refused to go off. I have to remove battery head to avoid drain.

I scanned with my Bluetooth scanner and got the response below.

Where is the particular switch mentioned located
What should we do??

GAZZUZZ:


Try another ecu

Another ECU was tried and problem disappered.

Thank you for your assistance, God bless you.

jceesquare:

Probably an issue with the replacement ECU.
Is yours an AWD model?
And was it towed for long with all 4 wheels down?

Thank you for this response. ECU was changed and the transmission is working well now.

Hello gazzuzz Sir,
Please my 2008 rav4 recently suffered from electrical issues.
Car went off and refused to start at an unsafe location. In order to free up the transmission to move vehicle to safety, I noticed the rewire inserted a screwdriver into the hole at the selector and moved it to neutral. Car was then rolled to safety where efforts were made to trace the problem.

ECU was detected as the cause. It has been changed and car starts and drive now.

Problem now is that, when I select reverse(R) or drive (D), it enters with a gentle bang.
But when driving, the other gears select quietly as before.
Putting it in R or D has always been very smooth without bang before now.

The brake light has also refused to go off.

No transmission code on Bluetooth scanner.

Could it have anything to do with the changed ECU or the rewire has touch something else?

What can I do to have that smooth bang-free experience again, please

Hello Sir,
Please my 2008 rav4 recently suffered from electrical issues.
Car went off and refused to start at an unsafe location. In order to free up the transmission to move vehicle to safety, I noticed the rewire inserted a screwdriver into the hole at the selector and moved it to neutral. Car was then rolled to safety where efforts were made to trace the problem.

ECU was detected as the cause. It has been changed and car starts and drive now.

Problem now is that, when I select reverse(R) or drive (D), it enters with a gentle bang.
But when driving, the other gears select quietly as before.
Putting it in R or D has always been very smooth without bang before now.

The brake light has also refused to go off.

No transmission code on Bluetooth scanner.

Could it have anything to do with the changed ECU or the rewire has touch something else?

What can I do to have that smooth bang-free experience again, please

@gazzuzz or any experience Oga in the house..


Hello Sir,
Please my 2008 rav4 recently suffered from electrical issues.
Car went off and refused to start at an unsafe location. In order to free up the transmission to move vehicle to safety, I noticed the rewire inserted a screwdriver into the hole at the selector and moved it to neutral. Car was then rolled to safety where efforts were made to trace the problem.

ECU was detected as the cause. It has been changed and car starts and drive now.

Problem now is that, when I select reverse(R) or drive (D), it enters with a gentle bang.
But when driving, the other gears select quietly as before.
Putting it in R or D has always been very smooth without bang before now.

The brake light has also refused to go off.

No transmission code on Bluetooth scanner.

Could it have anything to do with the changed ECU or the rewire has touch something else?

What can I do to have that smooth bang-free experience again, please

ebukaka12:
I greet una

Pls who get poco f5 case for market here??

We plenty wey need am now.

Marketers please do the needful.

call for inspection if you are in Benin city or environ.

SHiNJA4RMDWEST:
250k

Una Sha get mind.
U will profit from respecting yourself, trust me.

AlomoReloaded:
Just dey ppppplayyyy

Wow.
Clap for yourself.

This Year 2000 Nissan Primera is well maintained.

Engine is very fuel economical (2.0) with manual transmission.
Excellent for either private or commercial use.
Only negotiable on inspection, please.

Available for inspection in Edo State, Benin City.

I am the direct owner.

Whatsapp me on 08060346648, for more details and photos.

is this argument about the 02 - 03 corolla vs 07 - 08 civic ?? or both models of the same year?

i personally cannot spend that amount on the 03 corolla.
if its about fuel economy or ease of maintenance, there are better options.

bandwagon effect everwhere.

seanwilliam:
That’s why sometimes, it’s good to go for popular product.

To a large extent, this is true.

I always use 2phones sha. AliExpress route already activated.

My son recently damaged my Redmi k30 ultra screen.
I don’t even know how to go about ordering a replacement screen with all these CBN wahala.
Abi make I just buy person faulty own and transfer the screen?

Who can recommend a solution for me, please?


flipmodesquade
donbenie
hunkychunky
darkjeddi

donbenie:
Nonsense,which right thinking man would go to a Viewing Center while such a match is going on and off the TV?
Craze dey worry am?
If him dey craze, people dey there wey go cure am for him..

Bro hit me up: if your k30 ultra is still available.
0806034664eight

I’m getting the ford edge 2008 very soon by Gods grace.
Kindly add me to the WhatsApp group.

08060346648

Thanks.

MostWanted007:


Should they be Vaccinated with Lasota for 3 times? I thought it was 2Lasota , 2 Gomboro

After the first 2 lasota given within the first month of age, I give a monthly lasota too until sales.

Bobola07:

That's fantastic.
How is the k30 ultra doing with you?

Dope.
The best thing being this 120hz amoled screen, rendering the miui 12.5.
I love it.