NewStats: 3,262,808 , 8,178,221 topics. Date: Tuesday, 03 June 2025 at 04:27 PM 1i2s4m

Splashme:
Let the generations unborn note that these two old tribalists destroyed Nigeria

Where will you you put IBB and Jonathan?

Ok

When dollars go up ,materials go up but when dollars come down ,materials will refuse to come down ,says much about traders attitude rather than government.

A ton of iron that was sold for as low as 540 by December is sold for 1.2 now .

Buhari destroyed this country honestly.

People would come back to attack anyone that references the way APC has taken Nigeria and Nigerians backward.

PARADIZEPRIEST:
Bihari 8years malistration brought this upon you people not PTinubu of less than one year

True. But people like you and Tinubu (tribalists) were ing Buhari during those awful 8 years. Only the Southeasterners were complaining then.

If I have to roof 3-bedroom flat with Roman now that 6700x350=N2,345,000

MT:


What's the cost of Gerrard roofing ?

israelmao:
If I have roof 3-room flat with Roman now that 6700x350=N2,345,000

Yes sir

And you will still buy some accessories and workmanship as well

So budget like 2.7m

Which 1 b inflation again ? $ stopped rising for now . Which come be inflation again? Nigerians eh. Well, my joy is we will all leave everything behind someday.

money121:

Let see your price for complete guages
Because above price are for imported materials Not local materials

Feel free to share your price list if you have any

All of them are the same ! They re all criminals. You pay them for 0.55 they will supply you material far less than what you paid for. Why won’t dey end up spending all that money in the hospital ?

Nwodosis:

These are the problems we are having in the aluminum industries, whether it foreign or local materials, a gauge is a gauge, it is measure of thickness and not a name of materials. I was given the below material as 0.55mm but when I brought my Digital point microscrew meter gauge, the grammar changed, Oga na so we dey call am, na 0.55 we dey call am.

RecentHistory:


Standards Organisation of Nigeria (SON) should actually be scrapped and the workers sent to Jalingo to be doing POS business.

em still pack those mallams for there too

Tradepunter2:
People into selling of materials are the biggest liars I have ever come across

This is not the fault of people selling but the manufacturers.

The same thing happened in reinforcement, timbers, e.t.c

ATLANTIC01:
On a scale of 1-10 rate our New TV console delivered at Agbara ogun state.

Are you looking for where to find the best interior and exterior designs product and services at affordable prices?

We are a full-service interior and exterior design company currently based in Lagos, Nigeria.

@atlanticinteriors_showroom
@atlantic_interiors

📞 08119470142.

How much does it cost to install this particular TV console that you posted the pictures

This is nice. Looking to do something similar for my living room.

ATLANTIC01:
On a scale of 1-10 rate our New TV console delivered at Agbara ogun state.

Are you looking for where to find the best interior and exterior designs product and services at affordable prices?

We are a full-service interior and exterior design company currently based in Lagos, Nigeria.

@atlanticinteriors_showroom
@atlantic_interiors

📞 08119470142.

Not the best time for me to look at the old prices.

Make i no go discourage myself.

No going back!

[quote author=money121 post=128999889][/quote]

Thank you.

I never knew it was called "stone coated".

Please can you educate me on this. I was told there were so many fake stone coated roofing out there.

I have seen houses built within a year and the roofing fading off terrible, thus the aesthetic of the building is badly impacted.

Are there things to look out for to be certain one is buying the original material.

It is quite devastating buying fake stone coated materials at an exorbitant prices.

michlins:
exactly. In my line of work (I'm a welder), as prices were increasing, quality was also decreased.


If you don't have the funds, don't start any project for now, reinvest in your business or start a new one. You need insane amount of money to build anything like house now.

I will not agree with this.

I almost toed the same line but my bricklayer advised me not to. Today, I am thankful for that advice.

Just be doing it incrementally, don't stop, and don't go into debt.

Small steps, you will keep on moving.

feelme3:
This is nice. Looking to do something similar for my living room.

Thank you sir we are at your service sir.
We have other designs available.
: 08119470142
IG; atlanticinteriors_showroom
IG: atlantic_interiors

KomonSense:


How much does it cost to install this particular TV console that you posted the pictures

Budget friendly sir, you can Dm me with the size of your wall to give the cost.

08119470142

Nwodosis:

These are the problems we are having in the aluminum industries, whether it foreign or local materials, a gauge is a gauge, it is measure of thickness and not a name of materials. I was given the below material as 0.55mm but when I brought my Digital point microscrew meter gauge, the grammar changed, Oga na so we dey call am, na 0.55 we dey call am.

Beautiful. This is what we call evidence based response 👏.

Just last week I got a quote from a portacabin company in Abuja. While negotiating the exorbitant price, the engineer told me their price is higher because they use thicker frames compared to other competitors.

So I asked what's the thickness.... with pride he said 5mm. So I asked him where are the samples. He showed me in their warehouse. Being an engineer (practical one), I knew it was less than 5mm and are 3mm merely seeing them. So I argued with him that they aren't up to 5mm. But he insisted. Luckily my toolbox was in my car and I brought out measuring tape..... lo and behold it was actually 3mm.

Suddenly his face was deflated like a punctured tyre.....and started struggling for words to explain himself. Guys you need to be smart otherwise people go run you street and still expect a big "Thank you" gesture from you.

You easily win cases or arguments by presenting facts 💯 like the quoted moniker did. Not just baseless claims without backings. Otherwise, "you go explain tire, no evidence"

Emusan:


This is not the fault of people selling but the manufacturers.

The same thing happened in reinforcement, timbers, e.t.c

It's sad sha consumer protection council is doing nothing

ojasweb:
Not the best time for me to look at the old prices.

Make i no go discourage myself.

No going back!

Keep pushing

Brendaniel:
We warned them about Tinubu, they did not listen, some of them don't still know the evil they have done and still doing by ing Tinubu

We will still vote him come 2027 . Name one project your pit obi the chief mourner of Nigeria started and completed in anambra state ?

GanagiBitrus:

Had to suspend a building project because of high cost.

Pls is there any hope of prices coming down in the nearest future?

it won't. It will keep going up. I paused my project after roofing in October last year. Waiting for cement price to drop from N6300 to 3500 according to the rumours. I ended up buying cement for 12k last month.

MT:


Thank you.

I never knew it was called "stone coated".

Please can you educate me on this. I was told there were so many fake stone coated roofing out there.

I have seen houses built within a year and the roofing fading off terrible, thus the aesthetic of the building is badly impacted.

Are there things to look out for to be certain one is buying the original material.

It is quite devastating buying fake stone coated materials at an exorbitant prices.

Yes whatsapp 08085310359 for more enquires
I saw you are at stage of roofing

Nwodosis:

These are the problems we are having in the aluminum industries, whether it foreign or local materials, a gauge is a gauge, it is measure of thickness and not a name of materials. I was given the below material as 0.55mm but when I brought my Digital point microscrew meter gauge, the grammar changed, Oga na so we dey call am, na 0.55 we dey call am.

The same thing I witness the day I went to buy iron rod. 16mm was like full 12mm. 12mm rod was like below 10mm. SON is very useless in their surveillance and control.

HydraFeeds:
When dollars go up ,materials go up but when dollars come down ,materials will refuse to come down ,says much about traders attitude rather than government.

A ton of iron that was sold for as low as 540 by December is sold for 1.2 now .

The sad thing is that the gauge are not correct. 16mm is like 12/11mm etc

money121:

Yes whatsapp 08085310359 for more enquires
I saw you are at stage of roofing

Yes. Just done with setting of blocks after lintel.

Will sound you out on whatssap

Nwodosis:

These are the problems we are having in the aluminum industries, whether it foreign or local materials, a gauge is a gauge, it is measure of thickness and not a name of materials. I was given the below material as 0.55mm but when I brought my Digital point microscrew meter gauge, the grammar changed, Oga na so we dey call am, na 0.55 we dey call am.

You are right. This is a Nigerian thing. Same thing with those selling mattress, the sell 20inches as 24, 18 as 20 etc.

GanagiBitrus:

Had to suspend a building project because of high cost.

Pls is there any hope of prices coming down in the nearest future?

Welcome to Nigeria where gravity isn't applicable to prices of things

anyilalaz:


The sad thing is that the gauge are not correct. 16mm is like 12/11mm etc

you’re correct ,I saw a 16mm used about 10 years ago compared to the one just bought …the difference is clear .

The reduction in quality is the fault of Nigerian institutions,just bribe officials and you will be given a .