NewStats: 3,264,730 , 8,184,543 topics. Date: Thursday, 12 June 2025 at 08:38 AM 5f2w4q

enochogaga:
Am here to give you any answer about fault on ur generators, and how to identify original generators.

Hello boss! What would be the recommended gen size and capacity for a guy with an inverter freezer, plus smart tv and washing machine?

2.5kvs will do the job.

GabrielYulaw:


Hello boss! What would be the recommended gen size and capacity for a guy with an inverter freezer, plus smart tv and washing machine?

enochogaga:
2.5kvs will do the job.

Thank you for the quick reply, sir. I intend to buy a Thermocool gen. But the Thermocool gens I've seen on websites that are listed as 2.5kva are described as "for light use only".
Does that matter? Should I get a gen for medium use or is that an overkill?

2.5kva will confortably power ur listed appliances, i think u missed the point thermocool saying the gen is used for light only, does that means u can't use it for tv,fans,and other appliances? If the thermocool is actually 2.5kva u good to go that's all.

GabrielYulaw:


Thank you for the quick reply, sir. I intend to buy a Thermocool gen. But the Thermocool gens I've seen on websites that are listed as 2.5kva are described as "for light use only".
Does that matter? Should I get a gen for medium use or is that an overkill?

enochogaga:
2.5kva will confortably power ur listed appliances, i think u missed the point thermocool saying the gen is used for light only, does that means u can't use it for tv,fans,and other appliances? If the thermocool is actually 2.5kva u good to go that's all.

Okay sir. Much thanks and happy Sunday

aieromon:


https://mercurydirect.com.ng/product/mercury-ups-replacement-battery-7-5ah-12v/

7Ah from ₦13,000
18Ah from ₦18,000

Bros abeg.
Does this battery need to be filled or I can connect direct to Gen & use?

BuyAndSellStuff:


Bros abeg.
Does this battery need to be filled or I can connect direct to Gen & use?

Direct plug and play.

Hello guys... I'll be buying a freezer and inverter Ac soon and i would like to know if my fireman 2900 generator can power any of them. If not which Gen should i look to buy?

Travoski:
Hello guys... I'll be buying a freezer and inverter Ac soon and i would like to know if my fireman 2900 generator can power any of them. If not which Gen should i look to buy?

buy inverter deep freezer too. You will appreciate it

Hello guys, the transformer on my street got vandalized and this has resulted to no water supply in my house. Please I will like to know if a 1.1kva generator (sumac 1800) will power a 1.5hp pumping machine?. Any other suggestions? I'm on a tight budget. Thank you

Kykyblaze:
Hello guys, the transformer on my street got vandalized and this has resulted to no water supply in my house. Please I will like to know if a 1.1kva generator (sumac 1800) will power a 1.5hp pumping machine?. Any other suggestions? I'm on a tight budget. Thank you

no it can’t

DanielsParker:
no it can’t

Please which would you recommend?

Kykyblaze:
Please which would you recommend?

From 3kva

enochogaga:
Am here to give you any answer about fault on ur generators, and how to identify original generators.

Good evening boss.

My Sumec Fireman FPG4800E2 just tripped off.
I put it on; it powered for about 1 minute, and suddenly tripped off.
I tried to start it manually but, it did not come up.

I then changed the oil (The oil was actually spent as evident in the color).
I also cleaned the plug, it was not really dirty (but to play safe)
I checked the oil filter, and it was good. But, it still did not come up, both via key start or manual start.
I then changed the plug with a new plug, but it still did not come up.

It is not even starting at all, not like it is a choke problem.

Please, What could be the issue?

I purchased the sumec in February from an authorised dealer, so I'm sure it's not fake.


Additional info
The only load I use it with is a Thermocool inverter freezer, smart Tv and power-saving bulbs.
Whenever I make use of a 1,000 Watt Microwave, I always put off the inverter freezer to ensure the load is not excessive.

When it tripped off, the only load on it was the inverter freezer.


I don't want these repairers to start touching things that would result in more faults. (Except it's absolutely necessary that they check it) .

Cc:
nwaozzugwor

enochogaga
Gptech
Aieromon
Suco01
Repairzone
Earthrealm
nwaozzugwor
enochogaga


Thanks

Hope the gen has compression? If yes then wot u should look at for is the fuel supply, remove the fuel hors and see if fuel is flowing, if the fuel is flowing, then disconnect the oil alert switch and see if it will start

EmmanuelCena:


Good evening boss.

My Sumec Fireman Spg3800 just tripped off.
I put it on; it powered for about 1 minute, and suddenly tripped off.
I tried to start it manually but, it did not come up.

I then changed the oil (The oil was actually spent as evident in the color).
I also cleaned the plug, it was not really dirty (but to play safe)
I checked the oil filter, and it was good. But, it still did not come up, both via key start or manual start.
I then changed the plug with a new plug, but it still did not come up.

It is not even starting at all, not like it is a choke problem.

Please, What could be the issue?

I purchased the sumec in February from an authorised dealer, so I'm sure it's not fake.


Additional info
The only load I use it with is a Thermocool inverter freezer, smart Tv and power-saving bulbs.
Whenever I make use of a 1,000 Watt Microwave, I always put off the inverter freezer to ensure the load is not excessive.

When it tripped off, the only load on it was the inverter freezer.


I don't want these repairers to start touching things that would result in more faults. (Except it's absolutely necessary that they check it) .

Cc:
nwaozzugwor

enochogaga
Gptech
Aieromon
Suco01
Repairzone
Earthrealm
nwaozzugwor
enochogaga


Thanks

enochogaga:
Hope the gen has compression? If yes then wot u should look at for is the fuel supply, remove the fuel hors and see if fuel is flowing, if the fuel is flowing, then disconnect the oil alert switch and see if it will start

Thanks a lot boss.

for the compression, How do I know if the gen has compression or not?

As for the fuel flow, I will check tomorrow.

I'll surf the net if the oil alert switch is something I can locate myself.

Thanks

The gen has compression:
The plug was removed and manually started- There was forceful air observed coming out.

Fuel supply is okay:
One of the bolts beneath the carburettor was loosened, fuel was observed to come out.
After it fully drained out, the fuel pump was put on to confirm there is no blockage to the flow of fuel- Fuel was observed to come out with no restriction

The oil alert switch has been disconnected:
a yellow cable, the oil alert cable was disconnected and the gen started
It still did not come up.

I also tried another plug but, the gen still did not come up.


Any suggestions on what the cause could be ?
thanks

enochogaga:
Hope the gen has compression? If yes then wot u should look at for is the fuel supply, remove the fuel hors and see if fuel is flowing, if the fuel is flowing, then disconnect the oil alert switch and see if it will start

What about a 2.0kva generator?

DanielsParker:


From 3kva

My Haier thermocool gen 1.1 hard start or do not start at all
What I notice while trying to start

The pressure is low

enochogaga:
2.5kvs will do the job.

.

Good morning boss, i have the following appliances:
55" Hisense smart Tv
Bluetooth Home Theatre
Ps4 console
Ceiling fan and energy bulbs.

Please recommend size of Gen to go for, thanks 🙏.

German Generator
Product Name - ACME
Alternator rating - 3.75KVA (Very Big Copper Coil)

Sparingly used
Engine or coil has NEVER been opened or repaired. Just normal oil change.

150k

Location - Lagos
WhatsApp or call - 07025326910

Get 2.5kva that ps4 consume power

Nu3L:
.

Good morning boss, i have the following appliances:
55" Hisense smart Tv
Bluetooth Home Theatre
Ps4 console
Ceiling fan and energy bulbs.

Please recommend size of Gen to go for, thanks 🙏.

EmmanuelCena:
The gen has compression:
The plug was removed and manually started- There was forceful air observed coming out.

Fuel supply is okay:
One of the bolts beneath the carburettor was loosened, fuel was observed to come out.
After it fully drained out, the fuel pump was put on to confirm there is no blockage to the flow of fuel- Fuel was observed to come out with no restriction

The oil alert switch has been disconnected:
a yellow cable, the oil alert cable was disconnected and the gen started
It still did not come up.

I also tried another plug but, the gen still did not come up.


Any suggestions on what the cause could be ?
thanks

Check for sparks at the plug. It could be the culprit.

BoboKush:
My Haier thermocool gen 1.1 hard start or do not start at all
What I notice while trying to start

The pressure is low

Anybody please

Hello bosses, what's your take on power value 3800 generator. Is it a good product?

Good evening,

Please I would like to know types of half engine to buy for my Haier Thermocool Tec Gen Petrol Major Electric Start Major 3500es 3.0KW/3.3KW. The gen is consumed oil and I was advice to buy half engine but dont know types to buy and horse power.

Please any price idea?

tziz:
Please how much and where can I get original Piston and Rings for Sumec Firman SPG2900 gen in PH? Pic attached..

how good is this generator?
I'm planning on buying it tomorrow

Items for sale

1.Soccerpower PSW Inverter alone Available. 55k (1.5KVA 24V)

2. Jigsaw(800w)- 30k

3. Angle grinder/Filling machine(1010w) 25k

7. 16pcs dinner set - 13k

8. Two-Layer Dish Rack - 5k

And others
These are the tangible ones

All tools are Total products and were sparingly used and almost in mint condition.

Location is Warri

DM for negotiations and pictures.

Very little room for negotiations

EmmanuelCena:


Good evening boss.

My Sumec Fireman FPG4800E2 just tripped off.
I put it on; it powered for about 1 minute, and suddenly tripped off.
I tried to start it manually but, it did not come up.

I then changed the oil (The oil was actually spent as evident in the color).
I also cleaned the plug, it was not really dirty (but to play safe)
I checked the oil filter, and it was good. But, it still did not come up, both via key start or manual start.
I then changed the plug with a new plug, but it still did not come up.

It is not even starting at all, not like it is a choke problem.

Please, What could be the issue?

I purchased the sumec in February from an authorised dealer, so I'm sure it's not fake.


Additional info
The only load I use it with is a Thermocool inverter freezer, smart Tv and power-saving bulbs.
Whenever I make use of a 1,000 Watt Microwave, I always put off the inverter freezer to ensure the load is not excessive.

When it tripped off, the only load on it was the inverter freezer.


I don't want these repairers to start touching things that would result in more faults. (Except it's absolutely necessary that they check it) .

Cc:
nwaozzugwor

enochogaga
Gptech
Aieromon
Suco01
Repairzone
Earthrealm
nwaozzugwor
enochogaga


Thanks

Disconnect the oil alert...start it and connect it back

Spirit04:
how good is this generator?
I'm planning on buying it tomorrow

Is a good product just that it comes only as hand starter

ajimuguda:
Good evening,

Please I would like to know types of half engine to buy for my Haier Thermocool Tec Gen Petrol Major Electric Start Major 3500es 3.0KW/3.3KW. The gen is consumed oil and I was advice to buy half engine but dont know types to buy and horse power.

Please any price idea?

2.5kva to 3.5kva has the same type of engine ...the only difference is the configuration especially if your own has a kick starter..

Just go to the market...ask for a good product not necessarily sumec because it will be expensive ..

Other products cost 32k for an engine but sumec costs up to 90k

Ymguitarz:
Hello bosses, what's your take on power value 3800 generator. Is it a good product?

Maintenance is always the key...

Is a good product